Mickey Thompson Tires and Wheels has been a top enthusiast brand for more than five decades. The company never fails to make record breaking products, which is only possible due to its commitment to Mickey Thompson's legacy. This is a company for enthusiasts by enthusiasts; it provides some of the best off road, strip, and street products out there. Best of all, all Mickey Thompson tires are made in USA.
Classic III 15X10 with 5X5.50 Bolt Pattern 3.625 Back Space Polished. The Mickey Thompson Classic III wheel features the classic 8-Hole design in a highly polished finish that includes matching polished hand holes. The embossed M/T logo is assurance of quality, strength and dependability. The Classic III is available in sizes 15x8 through 17x9.
- Redesigned smooth outer lip for clean appearance
- Unique sizing includes 15x12 and 16x12
- Non-corrosive screw on center cap
- Lifetime Limited Warranty against structural defects
- We do not offer center caps for 1986 and earlier Jeeps
- Wheels are not compatible with 1986 and earlier CJ models
- Size: 15X10
- Finish: Polished
- Bolt Pattern: 5X5.50
- Back Space: 3.625
- Offset MM: -45 mm
- Hub Bore MM: 4.193 Inch
- Max Load LB: 2,500 lb
- Approx Weight LB: 19
- Replacement Cap: 90000001670
- Material: Aluminum
All Mickey Thompson Classic Series, SideBiter, and M/T Metal Series wheels require (60-Degree) Bulge Acorn (Cone Bulge) Seat Lug Nuts. Mickey Thompson recommends Duplex Bulge Acorn Lug Nuts on vehicles of GVWR of 6,500 lbs. or greater.
All Deegan 38 Series wheels use 60 Degree Conical Bulge Seat lugs but will also accept E/T Style lug nuts which provide a lug-centric installation.
For All 6x5.5 Bolt Circle Wheels: Hub Centering Ring included for late Model Chevrolet/GMC applications.
Center caps are not available for certain applications including 1997 and earlier Ford 3/4 and 1-ton pickups, 2002 and earlier Dodge/Ram 3/4 and 1-ton pickups, 1986 and earlier Jeep, CJ models and earlier Toyota Land Cruiser models.
Open caps are available for 5, 6 and 8 lug Classic Series wheels, separately.
Note: All dual drill wheels in the MT Metal line are cover-style capsâ€”no exposed lugs.
Professional installation by a licensed exhaust shop is required.
Series: Classic III
Sols As: Each
Bolt Pattern: 5X5.50
Back Space: 3.625
Hub Bore Diameter: 4.193 Inch
Legacy Mickey SKU: 2350402
Max Load: 2,500 lb
Net Weight: 18.861 lb
Offset: -45 mm
Replacement Center Cap Par: 90000001670
Rim Diameter: 15
Warranty: Lifetime Limited Warranty
Volume cu/ft: 2.0 ft3
Fitment & Application:
|Shipping Method||UPS/FedEx/USPS Ground|
|Availability||Possibly sold-out. Call or email to check stock.|
|California Prop 65 Warning||
This product can expose you to chemicals that are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov