Apexi offers high quality products at completitive prices. Manufactured using cutting-edge technology and vigorous testing, Apexi performance products are what most enthusiasts and racers demand. Most Apexi performance proucts are made in Japan.
The Apex Power Intake filter element is engineered to minimize air flow restrictions without compromising its ability to filter contaminants from the induction air stream. We proudly expand the usage of the Power Intake filter element by incorporating it into a line of drop-in, factory-replacement filters. A little TLC for your daily driver. The Power Intake is dry-type filter and is trouble free. Some of the problems associated with wet type cleaners, such as oil sticking to the air flow meter, are a thing of the past. The Power Intake is basically maintenance free. Filter replacement, when necessary, can be done at a very low cost. Filter life has been tested to operate over 25,000km (15,000mi) under normal street driving conditions. Filter maintenance and overall life differs depending upon conditions under which the filter is used. Inspect for wear and tear, use best judgment, and replace if damage is suspected. The filter can be cleaned by blowing compressed air through the filter, opposite the direction of inbound airstream. This filter is designed for use as a dry-type filter. Do not apply filter oil to this filter as it was not designed to utilize such oils. Water, cleaning solvents, and other liquids may damage the filter and must not be used to clean the filter.
PRODUCT FEATURES:
- Progressive-density filter element improves power and efficiency, without compromising ability to filter dust and dirt.
- Dry-type filter element requires no oiling, and will not foul air flow sensors.
- Ideal for light-tune cars, and cars that develop problems with idle and throttle response issues when the factory air box is removed.
- Factory replacement filter installs in minutes.
- Easy Cleaning and maintenance.
APEXi Power Intake Panel, S13, S14, S15 - Silvia 89-02
Installation Notes:
Professional installation is required.
Specifications:
| Bolt-On | Yes |
|---|---|
| Part Number | 503-N101 |
| Make | Nissan |
| Model | 300ZX / 350Z / Skyline / Silvia / 240SX |
| Body Style | All |
| Engine | KA24, RB20, RB25, RB26, VG30, VQ35, VQ35, SR20 |
| Intake Type | Power Intake Panel |
| Intake Length | 279mm (10.98 in) |
| Intake Width | 167mm (6.57 in) |
| Intake Height | 27mm (1.06 in) |
| OEM P/N Cross Reference | Nissan- 16546-V0100 |
![]() |
WARNING: California Prop 65 Cancer & Reproductive Harm www.p65warnings.ca.gov |
Fitment & Application:
- 2002 Nissan Silvia S13/S14/S15
- 2001 Nissan Silvia S13/S14/S15
- 2000 Nissan Silvia S13/S14/S15
- 1999 Nissan Silvia S13/S14/S15
- 1998 Nissan Silvia S13/S14/S15
- 1997 Nissan Silvia S13/S14/S15
- 1996 Nissan Silvia S13/S14/S15
- 1995 Nissan Silvia S13/S14/S15
- 1994 Nissan Silvia S13/S14/S15
- 1993 Nissan Silvia S13/S14/S15
- 1992 Nissan Silvia S13/S14/S15
- 1991 Nissan Silvia S13/S14/S15
- 1990 Nissan Silvia S13/S14/S15
- 1989 Nissan Silvia S13/S14/S15
| Brand | Apexi Performance |
|---|---|
| Part Number | APX-503-N101 |
| Shipping Method | UPS/FedEx/USPS Ground |
| California Prop 65 Warning |
|


This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or reproductive harm. For more information, visit https://www.p65warnings.ca.gov/