SkyJacker's advanced suspension systems are meticulously engineered to elevate your vehicle's performance and your off-road adventures. Whether you're conquering rugged terrains or navigating city streets, SkyJacker Suspension delivers unparalleled durability, unmatched comfort, and a commanding presence.
Skyjacker specifically engineered a progressive variable rate coil spring, distinctively a 2-stage dual rate long travel coil. Spring rate progression is from a first Flex Rate to a second Ride Rate.
First Flex Rate stage delivers a comfortable ride with the ability to flex/expand during full articulation as the suspension drops (full droop). This keeps the coil springs seated in the upper coil mount/bucket and the tires in contact with the terrain. Second Ride Rate stage only engages after compression past Flex Rate.
Includes a Pair of Front and a Pair of Rear Dual Rate Long Travel Coil Springs.
Front and Rear Bump Stop Spacers bolt in between the upper frame and OEM bump stops. Correct bump keeps the suspension travel safely in check.
Rear Track Bar Lower Axle Mount Bracket mounts directly to the rear axle housing to correct the track bar angle. The track bar bracket re-centers the rear axle and improves suspension handling and a lower roll center. Lower roll center means less side-to-side sway.
Eccentric alignment cam bolts correct caster and pinion angles (front lower axle and rear upper front). Comes complete with Bushings and High-Grade Mounting Hardware.
Features:
- 2.5 in. Component Box With Dual Rate Long Travel Coil Springs 97-06 Jeep Wrangler TJ
- Specifically Engineered Progressive Variable Rate Springs.
- Flex Stage\Ride Stage Dual Rate Long Travel Coil Springs.
- Allows Full Articulation as Suspension Drops (Full Droop).
- Yields More Lift in the Front for a More Level Stance.
- Pre-Set to Reduce Any Chance of Fatigue or Sag.
- Cycle Tested to Assure the Very Best in Quality.
- Bump Stop Spacers Keep Suspension Travel Safely in Check.
- Track Bar Bracket Centers Axle Under Vehicle Properly.
- Resilient Powder Coat and Zinc Plating Resists Corrosion.
- Straight Bolt-On. Direct Fit, Simple Remove and Replace.
- Complete with All High-Quality Grade Mounting Hardware.
- Durable Components Deliver a Dependable Dynamic System.
Specifications:
Drive: 4WD
Fitment & Application:
- 2006 Jeep Wrangler X
- 2006 Jeep Wrangler ULTD Rubicon
- 2006 Jeep Wrangler ULTD
- 2006 Jeep Wrangler SE/Sport
- 2006 Jeep Wrangler Rubicon
- 2006 Jeep Wrangler 65th Anv ED
- 2005 Jeep Wrangler X
- 2005 Jeep Wrangler ULTD Rubicon
- 2005 Jeep Wrangler ULTD
- 2005 Jeep Wrangler SE/Sport
- 2005 Jeep Wrangler Rubicon
- 2004 Jeep Wrangler X
- 2004 Jeep Wrangler ULTD
- 2004 Jeep Wrangler Sahara
- 2004 Jeep Wrangler SE/Sport
- 2004 Jeep Wrangler Rubicon
- 2003 Jeep Wrangler X
- 2003 Jeep Wrangler Sahara
- 2003 Jeep Wrangler SE/Sport
- 2003 Jeep Wrangler Rubicon
- 2002 Jeep Wrangler X
- 2002 Jeep Wrangler Sahara
- 2002 Jeep Wrangler SE/Sport
- 2001 Jeep Wrangler Sahara
- 2001 Jeep Wrangler SE/Sport
- 2000 Jeep Wrangler Sahara
- 2000 Jeep Wrangler SE/Sport
- 1999 Jeep Wrangler Sahara
- 1999 Jeep Wrangler SE/Sport
- 1998 Jeep Wrangler Sahara
- 1998 Jeep Wrangler SE/Sport
- 1997 Jeep Wrangler Sahara
- 1997 Jeep Wrangler SE/Sport
| Brand | SkyJacker Suspension |
|---|---|
| Part Number | SKY-TJ25BLT |
| Shipping Method | UPS/FedEx/USPS Ground |
| California Prop 65 Warning |
|

This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or reproductive harm. For more information, visit https://www.p65warnings.ca.gov/