Accessorize the top of your engine and the pulleys with the PERRIN Belt Cover.
For Aftermarket Intercoolers - This part is designed to be installed with aftermarket front-mounted intercoolers and other top-mounted intercoolers that do not utilize the OEM plastic engine cover to seal to the hood. Do not install this when using a stock intercooler as the hood seal will not function properly and a significant amount of power will be lost due to the intercooler not functioning.
Construction - The PERRIN Pulley Cover is constructed of 5052 Plate aluminum with precision drilled mounting holes.
Finish - Powder coated for protection from the elements, the glossy neon yellow, or hyper pink will accent your show car while the classic textured red and black finish will look awesome for years to come!
Package Includes:
- (1) PERRIN Pulley Cover.
- (1) PERRIN Pulley Cover Bracket.
- (2) PERRIN Pulley Cover Washers.
- (2) M8 Flat head socket screws.
- (2) M8 Button head cap screws.
- (2) M6 Button head socket cap screws.
- (2) M8 Nuts.
- (4) M8 Fender washers.
- (2) M6 Fender washers, black oxide.
- (2) 10-32 Button head socket cap screws.
- (2) 10-32 Rubber wellnut.
- (1) 1/8" Short arm hex key.
- (1) M5 Short arm hex key.
- (1) M4 Short arm hex key.
- (1) PERRIN License Plate Frame.
- (1) Blue Loctite package.
- Warranty & Instructions
NOTE -This is for use on cars with upgraded TMIC/FMICs only.
Installation Notes:
Estimated Install Time - 30 Minutes.
Specifications:
Body Material - 5052 Plate Aluminum
Finish - Texture Red
Fitment & Application:
| Brand | Perrin Performance |
|---|---|
| Material | Aluminum |
| Part Number | PER-PSP-ENG-152RD |
| Shipping Method | UPS/FedEx/USPS Ground |
| California Prop 65 Warning |
|





This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or reproductive harm. For more information, visit https://www.p65warnings.ca.gov/