2015-2023 Dodge Challenger SXT/RT Front Splitter Extensions
SKU
252866
$249.99
Shipping & handling:
$45.00
(within lower 48 states)
This is our new front Splitter Extension for the 2015-2023 Challenger SXT/RT splitter. Made of 3/8" ABS black plastic with mat finish on the finished side and a smooth dimple finish on the bottom. This product has a 7-10 (M-F excluding holidays) business day build lead time before it will ship. Made in the USA!
Product Fitment:
- 2015-2023 Challenger SXT/RT (NON-ScatPack)
Installation Notes:
This product will use factory locations with some new bolt locations that will need to be matched drilled and have a rivnut installed. Remove the (9) 7mm bolts from your factory splitter on the back side. Mount the new splitter to those 9 factory locations with the provided 4.2m 1 1/2" screws and washers. Press the splitter against the vehicle and match drill forward locations with a 3/8" drill bit. Remove the splitter from the vehicle and install the 4 provided rivnuts with a rivnut gun. Make sure the rivnuts are fully squished and installed. Reinstall splitter from the rear bolts first than add the 1/4"-20 bolts and place spacers between the vehicle and splitter. Tighten up all bolts and enjoy.
Fitment Exclusion:
Will not work with SRT models with larger factory splitter.
| Brand | ZL1 Addons |
|---|---|
| Part Number | ZL1-22135001 |
| Shipping Method | UPS/FedEx/USPS Ground |
| California Prop 65 Warning |
|
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or reproductive harm. For more information, visit https://www.p65warnings.ca.gov/