AWD CRV Viscous Coupler Mount ing Brackets by Innovative Mounts

Viscous Coupler Mounting Brackets designed for AWD Swaps using a CRV or Wagon driveshaft. These Bolt in Brackets hold the viscous couplers to the exhaust tunnel

• No Welding Required
• Easy removal
• CAD/CAM Designed
• Stress Analyzed
• Lifetime Warranty

Note: Bolts to frame using Rivnuts. Rivnuts require a 13.5mm or 17/32 drill bit.

Note: For high-performance applications, it is recommended to also weld the Brackets to the frame for extra strength.

Note: It is strongly recommended that all installs be done by a mechanic or automotive specialist.
Mounts Can Not be returned or Swapped out after they have been Bolted down revealing Bolt impressions).
Please Make sure this Kit fits your vehicle before Bolting them in place.

Note: Innovative Engine/Motor Mounts are built for performance driving. Although Innovative's bushings are made to absorb Engine vibration, you may still notice slight vibration depending on your Engine's Series and HP. Innovative Mounts removes the dampening oil containers harbored by OEM/Stock Mounts. By switching to stiffer Mounts without the fluid reduces wheel hop and increases driving response.

Custom colors available through the website Only! Please allow 2 weeks extra for custom colors/anodizing

• No Welding Required
• Easy removal of top Mount
• Sway bar provisions
• CAD/CAM Designed
• Stress Analyzed
• Lifetime Warranty

Note: Notching of Rear sub-frame required.For installation, connect differential to Rear Mount and Bolt to subframe. Use a jack to level the Front of differential With the drivetrain and Bolt in the top Mount using Rivnuts. Rivnuts require a 13.5mm or 17/32 drill bit.