Apexi offers high quality products at completitive prices. Manufactured using cutting-edge technology and vigorous testing, Apexi performance products are what most enthusiasts and racers demand. Most Apexi performance proucts are made in Japan.
The A'PEXi metal head-gaskets provide upgraded protection on high horsepower engines. Factory head-gaskets cannot withstand the pressures of high output operation and often cause the engine to "blow." This condition is actually caused by a failure in the factory head-gasket. A'PEXi recommends replacing the factory head-gasket with a metal one before gasket failure causes more damage to the engine. The gaskets are all designed engine specific and provide a complete and secure seal.
APEXi Engine Metal Head Gasket 4G63, 87mm T=1.1 (CN9A / CP9A / CT9A)
Professional installation is required.
| Bolt-On | Yes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Part Number |
- 86mm
|
||||||||||||
| Engine | 4G63 | ||||||||||||
| Chassis | CN9A, CP9A, CT9A | ||||||||||||
| Gasket Type | Grommet Type | ||||||||||||
| Gasket Bore | 86mm | ||||||||||||
| Engine Bore Size (mm) | 85mm (factory) | ||||||||||||
| Gasket Thickness (mm) | T=1.1mm T=1.5mm | ||||||||||||
| Compression (Factory Head Gasket) | 8.8 | ||||||||||||
| Compression (A'PEXi Head Gasket) |
- 86mm
Fitment & Application:
|
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or reproductive harm. For more information, visit https://www.p65warnings.ca.gov/